DTM Print CX86e, User Manual

Page: 44 / 214

44
Printing a Demonstration Page
Use cut sheet cut to the following size or continuous paper (roll paper) without a mark. The operation is not guaran-
teed for other paper.
—
When printing on cut sheet
X
Prepare paper that is 74 mm wide and 210 mm long.
X Print after setting [MENUS] > [FEEDER CONFIG] > [PAPER FORM] > [CUT PAPER].
—
When printing on continuous paper (roll paper)
X Prepare continuous paper (roll paper) without a mark that is 74 mm to 86 mm wide.
X
Print after setting [MENUS] > [FEEDER CONFIG] > [PAPER FORM] > [CONTINUOUS PAPER]
and [MENUS] > [FEEDER CONFIG] > [CUT TYPE] > [LENGTH].
—
Confirm that [READY TO PRINT] is displayed on the machine.
—
Load the paper.
—
Press ∧ button or ∨ button to display [DEMO PAGE].
—
Press OK button.
—
Press OK button when [DEMO1/EXECUTE] is displayed.
Adjusting the Volume
A buzzer notifies the user when an error has occurred in the machine or printing has finished.
By default, the machine is set to sound the buzzer when the paper has run out.
This section describes how to change the volume and set whether to sound the buzzer.
Setting the Volume
Available values high, low, and off.
Low is set by default.
—
Confirm that [READY TO PRINT] is displayed on the machine.
—
Press ∧ button or ∨ several times to display [ADMIN SETUP].
—
Press OK button.
—
When [ENTER PASSWORD] is displayed, enter the password.
X The default password is “999999.”