151
Cause
Remedy
Reference
The WSD port is being used.
Change the destination port for
printing to the standard TCP/IP
port.
-
Wireless LAN Connection Problems
Cause
Remedy
Reference
The wireless LAN module is not
enabled.
Set [WIRELESS MODULE] in [BOOT MENU] to
[ENABLE].
Menu List
The network connection settings are
not suitable.
[WIRELESS
(INFRASTRUCTURE)] and [WIRELESS(AP MODE)]
cannot be enabled at the same time.
To connect with [WIRELESS
(INFRASTRUCTURE)], set [WIRELESS(AP MODE)] to
[DISABLE] and then set [WIRELESS
(INFRASTRUCTURE)] to [ENABLE].
To connect with [WIRELESS
(AP MODE)], set [WIRELESS
(INFRASTRUCTURE)] to [DISABLE] and then set
[WIRELESS
(AP MODE)] to [ENABLE].
Connecting via Wireless LAN
[WIRELESS (INFRASTRUCTURE)]
The machine is not connected to the
wireless LAN access point.
Check whether the wireless LAN access point is
turned on.
Check the settings of the wireless LAN access
point, and perform manual or automatic setup.
Restart the wireless LAN function.
Select [ADMIN SETUP] > [NETWORK SETUP] > [EN-
ABLING DEFAULT GATEWAY] > [WIRELESS (INFRA-
STRUCTURE)], and then select [RECONNECTION].
Place the machine in a location near the wireless
LAN access point with high visibility. (A distance
of 30 m or less is recommended)
Do not place an electric product that emits weak
radio waves (such as a microwave oven or a digi-
tal cordless telephone) near the machine.
If there is metal, aluminum window frame, or a
reinforced concrete wall between the machine
and the wireless LAN access point, connections
may be harder to establish.
Connecting via Wireless LAN
Summary of Contents for CX86e
