DTM Print CX86e, User Manual

Page: 78 / 214

78
Setting Paper Information on the Operation Panel
Use the operation panel to set the information for the paper to use to the machine.
Set the information in the following order: paper format
→ paper size → paper weight → cut type → cut position
Paper Format
For roll paper or continuous paper folded along a perforation (z-fold), set [CONTINUOUS PAPER].
For paper cut into single sheets, set [CUT PAPER].
—
Confirm that [READY TO PRINT] is displayed on the machine.
—
Press ∧ button or ∨ button several times to display [MENUS], and press «OK» button.
—
Press ∧ button or ∨ button to display [FEEDER CONFIG], and press «OK» button.
—
Press ∧ button or ∨ button to display [PAPER FORM], and press «OK» button.
—
With the setting flashing, press ∧ button or ∨ button to display the value you want to set, and press «OK» but-
ton.
—
Confirm that the setting stops flashing and "*" is displayed to the right of the value you want to set.
Paper Size
You can set 25.0 mm to 86.0 mm (1.00 inches to 3.40 inches) for the width and 3.0 mm to 551 mm (2.10 inches to
21.70 inches) for the length.
—
Press ∨ button once to display [X DIMENSION], and press «OK» button.
—
With the setting flashing, press ∧ button or ∨ button to display the value you want to set, and press «OK» but-
ton.
—
Confirm that the setting stops flashing and "*" is displayed to the right of the value you want to set.
—
Press ∨ button once to display [Y DIMENSION], and press «OK» button.
—
With the setting flashing, press ∧ button or ∨ button to display the value you want to set, and press «OK» but-
ton.
—
Confirm that the setting stops flashing and "*" is displayed to the right of the value you want to set.
Paper Weight
Set the weight of the paper to use. You can set LIGHT, MEDIUM LIGHT, MEDIUM,
MEDIUM HEAVY, HEAVY, ULTRA HEAVY1, ULTRA HEAVY2.
—
Press ∨ button once to display [MEDIAWEIGHT], and press «OK» button.
—
With the setting flashing, press ∧ button or ∨ button to display the value you want to set, and press «OK» but-
ton.
—
Confirm that the setting stops flashing and “*” is displayed to the right of the value you want to set.