DTM Print CX86e User Manual Download Page 37

Page: 37 / 214

Connected with

LAN Cable

Wireless LAN

(Infrastructure)

Wireless LAN

(AP Mode)

Available

Combinations

Yes

Connecting a USB Cable

A USB cable is not included with the machine. Prepare an A-B type cable separately.

For Windows, do not insert the other end of the USB cable into the computer until an instruction appears on

the screen during the printer driver installation.

Prepare a USB cable.

Make sure that the machine and the computer are turned off.

Insert the B end of the USB cable into the USB interface connector of the machine.

Do not insert the USB cable into the network interface connector. Doing so may cause a malfunction.

Insert the A end of the USB cable into the USB interface connector of the computer.

For Windows, do not insert the other end of the USB cable into the computer until an instruction appears on

the screen during the printer driver installation.

Summary of Contents for CX86e






















































































































































































































Search results

Summary of Contents for CX86e

Reviews:

DTM Print CX86e, User Manual, Page: 37 / 214

Search results

Summary of Contents for CX86e

Reviews: