DTM Print CX86e, User Manual

Page: 35 / 214

35
X
Enter the Admin password, and then press the OK button.
X Press ∧ button or ∨ button on the operator panel to display [NETWORK SETUP], and then press the OK but-
ton.
X Press ∧ button or ∨ button on the operator panel to display [ENABLING DEFAULT GATEWAY], and then press
the «OK» button.
X Press ∨ button the operator panel to display [WIRELESS (INFRASTRUCTURE)], and then press the OK button.
Connecting Using WPS
If the wireless LAN access point supports WPS, the connection to the wireless LAN can be made easily by using the easy
setup button (WPS button).
Follow the procedure below for the setup.
—
Confirm the position of the easy setup button and when to press the button by referring to the user manual of
the wireless LAN access point.
—
Confirm that the wireless LAN access point has been activated and is functioning normally.
—
Turn on the printer. When [SETUP WIRELESS?] appears, select [YES]. Proceed to Step 6.
—
Press
∧
button or
∨
button on the operator panel to display [WIRELESS SETTING], and then press the OK button.
—
Enter the Admin password, and then press the OK button.
X The default password is 999999.
—
Press up on the operator panel to select [ENABLE], and then press the OK button.
—
Press
∧
button or
∨
button on the operator panel to display [WPS SETUP], and then press the OK button.
—
Select [WPS-PBC], and then press the OK button.
—
Select [YES], and then press the OK button.
—
The Printer starts searching for wireless LAN access points. During 2 minutes, press the easy setup button for
the wireless LAN access point for a few seconds.
Once the setup completion screen is displayed, it indicates that the wireless LAN setup has completed.
Set the IP Address
Set a different IP address for the wireless LAN from that of the wired LAN. Enter the setting menu and make the set-
tings by the following procedure.
—
Press ∧ button or ∨ button on the operator panel to display [WIRELESS SETTING], and then press the OK button.
—
Enter the Admin password and then press the OK button.
X The default password is 999999.
—
Press ∧ button or ∨ button on the operator panel to display [NETWORK SETTING], and then press the OK but-
ton.