DTM Print CX86e User Manual Download Page 169

Page: 169 / 214

169

Transporting the Machine

Use the packaging, cushioning material, and cover toner that came with the machine when the product was purchased.

Turn off the machine.

For information on turning off the machine, refer to “Turning Off the Machine”.

Unplug all the cables.

Power cable

LAN cable/USB cable

Remove the loaded paper.

If a wireless LAN module is attached, remove it.

Remove the toner cartridge.

Attach the cover toners that were stored to replace the removed toner cartridge.

Attach the cushioning materials.

Insert the machine into the packaging.

Before Leaving the Machine

Before leaving the machine, it is strongly recommended that you erase the information registered or saved to the ma-
chine.

To delete the information, execute [ADMIN SETUP] > [OTHERS SETUP] > [ERASE PRIVACY DATA].

The information saved in the machine includes the following items.

Administrator password

Values registered to menus

Demonstration page data registered by users

Form data registered by users

Saved menu settings

Certificate

Summary of Contents for CX86e






















































































































































































































Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands

DTM Print CX86e, User Manual

Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands