manualshive.com logo in svg

DTM Print CX86e, User Manual

The DTM Print CX86e comes with a comprehensive User Manual, providing all the necessary instructions for easy and efficient operation. This manual is available for free download from our website, ensuring that users can access it conveniently and make the most out of their CX86e experience.

Share
Download
background image

30

 

—

Turning On or Off the Machine

 

—

About the Power Supply

 

—

Ensure the following conditions for the power supply.

 

—

CX86e: 110 to 127V AC (Range 99 to 140V AC)

 

—

CX86e: 220 to 240V AC (Range 198 to 264V AC)

 

—

Power frequency: 50/60 Hz ± 2%

If the power supply is unstable, use a voltage regulator. The maximum power consumption of the machine is 

650W. Check that the power supply is sufficient. Operation is not guaranteed if an uninterruptible power supply (UPS) 

or inverter is used. Do not use an uninterruptible power supply (UPS) or inverter.

 

—

Be sure to turn off the machine before connecting and disconnecting the power cord and the ground wire.

 

—

Be sure to connect the ground wire to the designated ground terminal.

 

—

If the machine cannot be grounded, contact your dealer. 

Be sure not to connect the ground wire to a water pipe, a gas pipe, the ground terminal of a telephone line, or a 

lightning rod.

 

—

Be sure to connect the ground wire before connecting the power cord to the outlet.  

Also, be sure to unplug the power cord from the outlet before disconnecting the ground wire. 

Be sure to hold the power plug when plugging in or unplugging the power cord.

 

—

Be sure to insert the power cord fully into the power outlet. 

Do not plug in or unplug the power cord with wet hands. 

Install the power cord in a location where users cannot step on it, and do not place any object on the power cord.

 

—

Do not bundle or tie the power cord 

Do not use a damaged power cord.

 

—

Do not overload the outlet.

 

—

Do not connect the power cords of this machine and other electric products to the same outlet. If the power cord 

of this machine is connected to the same outlet as other electric products, especially an air conditioner, copier, 

or shredder, this machine may malfunction due to electrical noise. If you have to connect the power cord of this 

machine to the same outlet as other products, use a commercially available noise filter or noise cut transformer.

 

—

Use the power cord included in this machine, and plug the cord directly into the outlet. Do not use the power 

cords of other products for this machine.

 

—

Do not use an extension cord. If you have to use an extension cord, use a cord rated 10A or higher.

 

—

If you use an extension cord, this machine may not work properly due to AC voltage drop.

 

—

Do not turn off this machine or unplug the power cord while printing.

 

—

If you do not use this machine for an extended period of time at occasions such as holidays or trips, unplug the 

power cord from the outlet.

 

—

Do not use the power cord included in this machine for other products.

Summary of Contents for CX86e























































































































































































































Reviews:

No comments

Related manuals for CX86e

Dash GHOST Instruction Manual preview
GHOST
Brand: Dash Pages: 28
Hamilton Beach 840153800 Owner'S Manual preview
840153800
Brand: Hamilton Beach Pages: 12
MrCoffee IS12 User Manual preview
IS12
Brand: MrCoffee Pages: 44
Saeco 10001872 Operating And Maintenance Manual preview
10001872
Brand: Saeco Pages: 100
Saeco Royal Gran Crema Instructions Manual preview
Royal Gran Crema
Brand: Saeco Pages: 20
T-Fal KM740 User Manual preview
KM740
Brand: T-Fal Pages: 54
Havso Erika 2.0 User Manual preview
Erika 2.0
Brand: Havso Pages: 20
Hubbard Systems Scotsman MF Installation Manual preview
Scotsman MF
Brand: Hubbard Systems Pages: 4
Expobar CARAT 1GR Technical Manual preview
CARAT 1GR
Brand: Expobar Pages: 71
STARBUCKS BARISTA AROMA SOLO User Manual preview
BARISTA AROMA SOLO
Brand: STARBUCKS Pages: 40
Spotlight CAFETIERE 12V TURBO CAR Manual preview
CAFETIERE 12V TURBO CAR
Brand: Spotlight Pages: 8
Ninja BELGIAN PRO NeverStick Quick Start Manual And Recipe Book preview
BELGIAN PRO NeverStick
Brand: Ninja Pages: 9
ZAGATO ESPRESSO COFFEE MACHINE Instruction Manual preview
ESPRESSO COFFEE MACHINE
Brand: ZAGATO Pages: 16
B.F.C. PERFETTA Instructions For Use Manual preview
PERFETTA
Brand: B.F.C. Pages: 32
La Marzocco strada ep 1 Manual preview
strada ep 1
Brand: La Marzocco Pages: 30
Orbegozo PK 4200 A Instruction Manual preview
PK 4200 A
Brand: Orbegozo Pages: 19
Ice-O-Matic ICEU 36 Service Manual preview
ICEU 36
Brand: Ice-O-Matic Pages: 55
Cuisinart DCC-450C Series Instruction Booklet preview
DCC-450C Series
Brand: Cuisinart Pages: 8

Brands by name

Popular brands

Load more brands