DTM Print CX86e User Manual Download Page 80

Page: 80 / 214

Setting the Paper Sensors

Checking the Paper Sensor Position

The position for setting the paper sensors differs according to the paper to use.

Adjust the paper sensors while checking the position based on the table below.

A paper jam will be incorrectly detected if the sensor position and cut type setting of the machine do not match. In

this case, change the position of the top sensor and bottom sensor so that they do not overlap if their positions were

matching or to match if their positions were overlapped.

Supported

Paper Type

Sensor Position

Printer Driver or Operation Panel Setting*

PAPER FORM

CUT TYPE

GAP LENGTH

Paper with

black mark on

the front

Top: Position of black mark
Bottom: Position that does not

overlap with the black

mark on the front

CONTINUOUS

PAPER

B/M(FRONT)

Summary of Contents for CX86e






















































































































































































































Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands

DTM Print CX86e, User Manual

Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands