Quick Start Guide
eSpreSSo maker
eS1500
partS
A. Main housing
B. On/Off switch
C. Control lever
D. Steam/water dispensing lever
E. Steam/water wand
F. On Indicator lamp
G. Boiler temperature control lamp
H. Steam function indicator lamp
I. Boiler temperature thermometer (˚C and ˚F)
J. Espresso spout (single or double)
K. Water tank
L. Ground espresso holder
M. Pod holder
N. Grille
O. Drip tray
P. Filter (not shown)
Q. Tamper
R. Cup warmer
S. Crema enhancer
T. Power cord (not shown)
U. Coupling seat
V. Scoop
GettinG Started
1. Unpack the Vero Barista™ Espresso Maker:
DO NOT leave plastic packaging materials
around children.
2. Wash water tank (K) with warm soapy
water, rinse and dry. Fill water tank with
clean water to the MAX fill line, then secure
it firmly into position.
3. Be sure that the control lever (C) and steam/
water dispensing lever (D) are in the vertical
standby position, and then switch the ma-
chine to the On position using the On/Off
switch (B). Espresso maker takes approxi-
mately 5 minutes to heat up.
4. Making 1 espresso cup – Attach the single
espresso spout to the holder (J).
Making 2 espresso cups – Attach the
double espresso spout to the holder (J).
5. If using ground espresso – use the scoop
(V) to measure the grounds to fill the ground
espresso holder (L) and use the tamper
(Q) to lightly press espresso grounds down.
Secure the holder to the front of the
machine. Note: 2 scoops (14 grams) max.
If using an espresso pod – place pod inside
the pod holder (M) and secure the holder to
the front of the machine.
6. Place one or two cups under the holder,
and activate the coffee function by pulling
the control lever (C) forward toward the
coffee cup symbol.
7. When the espresso has been dispensed to
the desired level, push the control lever (C)
back to the vertical standby position.
making cappuccino or Latte
If you wish to make cappuccino or latte,
push the control lever (C) back to activate
J
L
S
M
V
Q
O
N
B
E
K
D
R
I
C
F
A
G
H
U
