DTM Print CX86e, User Manual

Page: 188 / 214

188
Click [OK].
Click [View a summary of current configuration], confirm the current settings, and click [X] to close the window.
You can also check the current settings for a maximum of two addresses in the main window. Select the address to
check from the list box.
Click [Submit].
The new setting is enabled after the network function of the machine is restarted.
—
Notification e-mail is not sent unless the target error has occurred.
Using SNMPv
Using an SNMP manager that supports SNMPv3 enables the management of the machine to be encrypted via SNMP.
Open the Web page of this machine.
—
For information on starting the Web page, refer to “Starting the Web Page”.
Log in as the administrator.
Select [Admin Setup].
Select [Network] > [SNMP] > [Setup].
Follow the on-screen instructions to configure the detailed settings.
Click [Submit].
The new setting is enabled after the network function of the machine is restarted.
—
You can use a commercial SNMP manager tool to check and change the settings of the machine. For information
on the MIB of the machine, access the “Software DVD-ROM” included with the machine, and check the MIB defini-
tion files in the [Misc] > [MIB Files] folder.
Using IEEE802.1X (Wired LAN)
The machine supports IEEE802.1X authentication. IEEE802.1X authentication is performed after enabling it on the
Web page and connecting to the authentication switch.