DTM Print CX86e User Manual Download Page 15

Page: 15 / 214

Installing Consumables

Do not turn the power of the machine on.

Install the consumables after confirming that the power of the machine is off.

Use extra care when handling the image drum (the glossy cylinder), because it is fragile.

Do not expose the image drum unit to direct sunlight or strong light (approximately 1,500 lux or more). Do

not leave the image drum unit exposed for 5 minutes or more, even under room lighting. When the image

drum unit will be left alone for 5 minutes or more, cover it with black paper, etc. to prevent it from being

exposed to light.

Insert your finger into the recess on the top of the machine and pull up the lever.

Open the top cover until it stops.

Summary of Contents for CX86e






















































































































































































































Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands

DTM Print CX86e, User Manual

Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands