DTM Print CX86e, User Manual

Page: 166 / 214

166
The Power Turns Off Automatically
Cause Remedy Reference
If the machine is not used for a
certain period of time (4 hours by
default), it automatically turns off.
To prevent the power from turning off,
set [ADMIN SETUP] > [POWER SETUP]
>[AUTO PW OFF] to [DISABLE] on the
operation panel.
Setting the Auto Power Off Time
Paper Problems
Paper Jams Frequently Occur/The Paper Is Pulled in at an Angle
Cause Remedy Reference
The machine is not level. Install the machine in a flat and stable
location.
-
The paper is too light or too heavy. The paper is too light or too heavy. Use
paper that is suitable for the machine.
Loading Paper
The paper contains humidity or has
an electrostatic charge.
Use paper that is stored in an environ-
ment with suitable temperature and
humidity.
Loading Paper
The paper is wrinkled or warped. Use paper that is suitable for the ma-
chine. If the paper is warped, fix it.
Loading Paper
The paper is not loaded straight. Align the paper guide with the paper.
Loading Paper
The Machine Does Not Recover When the Paper Jam Is Removed
Cause Remedy Reference
The machine may not recover un-
less the top cover or feeder cover is
opened and closed.
Open and close the top cover or feeder
cover.
Names of Components
The combination of the cut type
setting and paper sensor position of
the machine does not match.
Change the position of the top sensor
and bottom sensor so that they do not
overlap if their positions were match-
ing.
Change the position of the top sensor
and bottom sensor so that they match
if they were not overlapping.
Setting the Paper Sensors