DTM Print CX86e User Manual Download Page 97

Page: 97 / 214

Specifying the Print Orientation

Perform the procedure below to change the print orientation.

Open the file to print.

Select [Print] from the [File] menu.

Click [Preferences].

Select the desired print orientation in [Orientation] on the [Setup] tab.

Click [OK].

Click [Print].

Rotating te Print Result 180 Degrees

You can change the settings of the printer driver to rotate the print result by 180 degrees, without changing the file to
print.

Open the file to print.

Select [Print] from the [File] menu.

Click [Preferences].

Select [180°] in [Orientation] on the [Setup] tab.

Click [OK].

Click [Print].

Specifying the Number of Prints

Available values are from 1 to 999.

Open the file to print.

Select [Print] from the [File] menu.

Click [Preferences].

Enter the number of prints in [Copies] on the [Setup] tab.

Click [OK].

Click [Print].

Summary of Contents for CX86e






















































































































































































































Search results

Summary of Contents for CX86e

Reviews:

DTM Print CX86e, User Manual, Page: 97 / 214

Search results

Summary of Contents for CX86e

Reviews: