DTM Print CX86e, User Manual, Page: 187 / 214

187
Select [Admin Setup].
Select [Network] > [E-mail] > [Alert Settings].
Enter the e-mail address to notify in [Failure Notification Settings].
Click [Setup] for the entered e-mail address.
Click [COPY] to apply the notification conditions to another address.
Select [Upon occurrence of an event] in [Failure Notification Method], and click [To Step 2].
Follow the on-screen instructions to configure the detailed settings.
Select an error or warning to send notification for to display the window for specifying the time difference between
when the error occurs and when the notification is sent.
Click [OK].
Click [View a summary of current configuration], confirm the current settings, and click [X] to close the window.
You can also check the current settings for a maximum of two addresses in the main window. Select the address to
check from the list box.
Click [Submit].
The new setting is enabled after the network function of the machine is restarted.
—
Periodically Sending Error Notifications via E-mail
Open the Web page of this machine.
—
For information on starting the Web page, refer to “Starting the Web Page”.
Log in as the administrator.
Select [Admin Setup].
Select [Network] > [E-mail] > [Alert Settings].
Enter the e-mail address to notify in [Failure Notification Settings].
Click [Setup] for the entered e-mail address.
Click [COPY] to apply the notification conditions to another address.
Select [Periodically] in [Failure Notification Method], and click [To Step 2].
Follow the on-screen instructions to configure the detailed settings.