DTM Print CX86e User Manual Download Page 48

Page: 48 / 214

Setting the Auto Power Off Time

If the machine is not used for a certain period of time, it automatically turns off.

By default, the machine does not automatically turn off. To make the machine automatically turn off, enable the Auto

Power Off setting on the operation panel, and then set the time until the power turns off. 4 hours is set by default.

Enabling Auto Power Off

Confirm that [READY TO PRINT] is displayed on the machine.

Press

∧

button or

∨

button several times to display [ADMIN SETUP], and press «OK» button.

Press

∧

button or

∨

button several times to display [POWER SETUP].

Press «OK» button.

Display [AUTO PW OFF].

Press

∧

button or

∨

button several times to set to [ENABLE] or [AUTO CONFIG], and press «OK» button.

Press «ONLINE» button, or press «BACK» button until [READY TO PRINT] is displayed.

Setting the Time Until Auto Power Off

Confirm that [READY TO PRINT] is displayed on the machine.

Press

∧

button or

∨

button several times to display [MENUS], and press «OK» button.

Press

∧

button or

∨

button several times to display [SYSTEM ADJUST].

Press «OK» button.

Display [POW SAVE TIME].

Press

∧

button or

∨

button several times to display [AUTO PW OFF TIME], and press «OK» button.

With the setting flashing, press

∧

button or

∨

button to display the value you want to set, and press «OK» but-

ton.

Press «ONLINE» button, or press «BACK» button until [READY TO PRINT] is displayed.

Summary of Contents for CX86e






















































































































































































































Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands

DTM Print CX86e, User Manual

Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands