DTM Print CX86e, User Manual

Page: 121 / 214

121
—
Hold the blue handle of a image drum unit, confirm the position to install it to the machine, and lower it vertical-
ly.
—
Close the top cover.
Replacing the Transfer Belt Unit
When "ORDER BELT UNIT" is displayed on the screen of the operation panel, prepare a replacement transfer belt unit.
The estimated timing for the next message to be displayed is when printing approximately 5,000 pages.
When "BELT UNIT LIFE" is displayed, replace the transfer belt unit.
The estimated replacement cycle of the transfer belt unit is approximately 100,000 pages for 216 mm simplex print-
ing (one page per job).
—
The actual number of pages you can print with the transfer belt unit depends on how you use it.
—
Even after "BELT UNIT LIFE" is displayed, you can extend the lifetime of the transfer belt unit somewhat by open-
ing and closing the cover, etc., but we recommend you replace the transfer belt unit soon to prevent malfunction.
—
Replace the transfer belt unit after you use it up to the end of its lifetime. If you use the removed transfer belt unit
with another device, its lifetime will not be displayed correctly.