DTM Print CX86e User Manual Download Page 207

Page: 207 / 214

207

Status Monitor

The Status Monitor is a utility for displaying the status of printers on a computer.

The Status Monitor includes the following functions.

Displaying the machine status

Retrieving information included in the following reports as a CSV file

Setting
Error Log

System Requirements

Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Server 2016/Windows Server 2012 R2/Windows Server

2012/Windows Server 2008 R2/Windows Server 2008

Administrator privileges for the computer are required for setup.

In order to use the Status Monitor, the printer driver is must be installed in advance, USB or the standard TCP/IP

port must be specified for [Ports] in the printer driver, and the machine must be connected.

Starting the Status Monitor

The Status Monitor automatically starts when printing is performed. Perform the procedure below to start it manual-
ly.

Select [Start] > [General] > [CX86e Status Monitor] to start the Status Monitor.

Displaying the Printer Status

[Printer State] Tab

No. Description

Displays the name of the printer for monitoring.

Displays the printer status as text.

Displays the printer status that has occurred concurrently with that on top
as text. (Only displayed when connected via USB)

Displays all the concurrent statuses of the printer as text.

Summary of Contents for CX86e






















































































































































































































Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands

DTM Print CX86e, User Manual

Search results

Summary of Contents for CX86e

Reviews:

Related manuals for CX86e

Brands by name

Popular brands