DTM Print CX86e, User Manual

Page: 74 / 214

74
Continuous Paper: With Holes + GAP
A
B Printable Range
Guaranteed Print Range
a
With holes in the paper center
a
b b
Feed Direction
e
J
(I/2
)
d
Printable Range
Guaranteed Print Range
f
I
c
A
B Printable Range
Guaranteed Print Range
a a
b
H P H
b
Feed Direction
e
J
(I/2
)
d
Printable Range
Guaranteed Print Range
f
g
g
I
c
Without holes in the paper center
F F
Paper Thickness 0.080 to 0.250 mm
Paper Width A 36 to 86 mm
Cut Length F 53 to 551 mm
Side margin a 4.2 mm
b 2 mm
Top margin c 4.2 mm
d 2 mm
Bottom margin e 6.3 mm
f 2 mm
Hole margin g 2 mm or more
Hole Width H 7 mm or more
Hole Length I With holes in the paper center: 1.6 to 5 mm<
Without holes in the paper center: 1.6 to 13 mm
Hole Pitch J 53 to 551 mm
Paper Center Separation
Distance Right Side
P(R) 3.5 to 36 mm
Paper Center Separation
Distance Left Side
P(L) 3.5 to 29 mm
Paper Format Setting CONTINUOUS PAPER
Cut Type Setting With holes in the paper center: CENTER HOLE
Without holes in the paper center: SIDE HOLE
Usage Conditions When there is a hole in the center of the paper, set [Bottom margin] to a value equal
or above the size of the hole. When there is not a hole in the center of the paper, set
[Top margin] and [Bottom margin] to a value equal or above half the size of the hole.
Guaranteed Print Range
Printable Range
B Maximum 80 mm