DTM Print CX86e, User Manual

Page: 193 / 214

193
Select [Network] > [Wireless(Infrastructure)] > [Manual Setup].
Select [Enabled] in [Wireless(Infrastructure)] in [Setup].
—
The default setting is [Disabled].
Enter the SSID name of the wireless AP to connect to in [SSID].
Select [WPA/WPA2-EAP] in [Security] in [Security Settings].
When all the basic settings and security settings are complete, click [Submit] on the bottom left of the Web screen to
reflect the settings. It may take up to one minute to connect to the wireless AP. If the connection fails, reconfigure the
wireless settings from the operation panel again or switch to wired LAN from the operation panel and reconfigure the
wireless settings from the Web page.
Configuration Tool
The Configuration Tool enables multiple devices to be managed or configured.
Registering the Machine
When installing the machine for the first time, register it to the Configuration Tool.
Click [Start], and select [General] > [Configuration Tool].
Select [Register Device] from the [Tools] menu.
When the devices that can be registered are displayed, select the machine and click [Register].
Click [Yes] on the confirmation screen.
Starting the Configuration Tool
Click [Start], and select [General] > [Configuration Tool].
Select this machine from [Registered Device Table].
Checking the Status of the Machine
You can check the status and information of the machine.
Click [Start], and select [General] > [Configuration Tool].