6
8
2
1
3
2
1
9
1
2
1.
2.
T Y P E S U P 0 2 1
T Y P E S U P 0 2 1 Y
7
TSM SUCCESS MANUAL® - safe to use - easy to
understand due to TSM® - Total Security Management
and ergonomic communication®
This TSM SUCCESS MANUAL® has been examined by SEV for conformity with the safety-relevant standards, and has
been analysed by an application-oriented risk analysis for the completeness and correctness of the instructions for a safe
use of the appliance. We have thereby assumed use based on common-sense.
3. Disassemble nozzle
4. Place nozzle parts under running
water and remove milk residue.
Dry separate parts, reassemble,
and mount on machine
1. Loosen the cap, remove nozzle
Use the frothing nozzle like the steam
nozzle to make wonderfully hot and
creamy Cappuccinos
2. Clean with damp cloth
Cleaning
After preparation
Using
PANNARELLO
(optional)
Every 3-4 months or
if lamp
is lit
(automatic)
DESCALE
Preparation
Descale
Duration: approx. 45 min.
…blink…blink…
as soon as
Rinse
1. Place large receptacle under hot water/ steam nozzle
2. Fill decalcification solution according to manufacturer’s
instructions in the water tank
3.
4. Open turning knob
5. Close turning knob
close
open
6. Rinse water tank + fill
7. Open turning knob and draw off tank contents
8. Close turning knob
Supplied accessories
Brewing unit key for
dismantling/ assembly
Cleaning brush
Test strip for water
hardness
Coffee scoop
Technical data
- Nominal voltage
see type plate on the machine
- Nominal output
see type plate on the machine
- Power
see type plate on the machine
- Frame
metal - plastic
- Dimensions (L x W x D)
approx. 27.5 x 35 x 42 cm / 11 x 14 x 17”
- Weight (net)
approx. 10 kg / 22 lbs
- Length of power cord
1.2 m / 1.30 yards
- Place for extra cord
yes
- Control panel
on the front
- Water tank
removable
- Capacity
water tank approx. 1.8 l / 60 oz
bean container approx. 180 g / 60 oz beans
- Heating unit
aluminum
- Pump pressure
approx. 15 bar
- Safety devices
pressure-sensitive safety release valve
for heating and safety thermostat
TROUBLESHOOTING
No indication
No power to the machine
- Switch on mains switch
- Check plug and power connection
Only water instead of coffee comes
when «Powder coffee» is selected
- Fill up a measure of powder coffee
Coffee is not hot enough
- Pre-heat cups
- Possibly clean brewing unit
- Descale if necessary
- Clean nozzle with needle
(when the machine is switched
off and nozzle is closed)
No hot water/ steam
Hot water/ steam nozzle blocked
Heating time too long
Not enough water
- Descale machine
Brewing unit cannot be removed
1. Close service door
2. Switch on machine
3. Brewing unit is unlocked
4. Continue with
Brewing unit cannot
be inserted
Restore brewing unit
to original position
(see illustrations -->)
Preparation does not start
Display:
blink
blink
blink
blink
blink
blink
blink
blink
blink
blink
Refill with fresh water
Ventilate machine: see instructions «Ventilate»
Descale: see instructions «Descale»
Too hot: draw of hot
water until …
Refill with beans
Empty coffee dregs drawer
(Operate only when the machine is ON)
Correctly insert brewing unit, dip tray, and
dregs drawer. Close service door
Grinding unit blocked. The motor of the
brewing unit is blocked
-> Contact a service technician
CLEAN
use a mild, non-scouring cleaning agent
Rub with a soft, damp cloth
Frame
Coffee dregs drawer
Drip tray
Rinse under running water
1. Open service door.
remove drip tray/
dregs drawer
2. Press PUSH position and withdraw the
brewing unit.
If necessary, unscrew upper
filter of the brewing unit
Clean everything under warm
running water and let it dry well.
Clean service area
3. Put brewing unit together
and slide back in. While inserting,
do not press on PUSH!
4. Insert drip tray / dregs drawer,
then close service door
Clean weekly.
Never wash the brewing
unit in the dishtwasher
2.1 Loosen filter with the key …
2.2 … and remove
Brewing unit
Please read these TSM® operating instructions before operating the device. In order to
obtain drinks of good quality and to avoid damage or injury, follow the instructions
precisely. Ensure that these instructions are given to any other users of the device and
that they are kept in a safe place so that they can be referred to at any time. The device
has been conscientiously checked for safety and correct operation. It left the factory in
fault-free working order.
Operating instructions
Water tank
Rinse under running water
Press for 5 seconds
-Clean the machine only after disconnecting plug from mains power socket
-Never use an ordinary or a microwave oven to dry the machine after rinsing
- To descale, make sure that the power cord is plugged in
and the machine switched on.
- Use a non-toxic, harmless, commercial decalcifying
agent.
-
NEVER use VINEGAR
(possible damage to device!)
- When the machine has cooled down, note manufacturer’s instructions!
- If the machine is turned off during the descaling procedure, it will continue
again where it left off when the machine is turned on again.
- Throughout the whole descaling process, the machine automatically stops,
at intervals, the distribution of the descaling agent.
Proceed as with preparation «STEAM/
CAPPUCINO», immerse nozzle approx.
3-4 cm/1-1.5” in the milk
Read carefully the enclosed safety instructions before initial operation
Remove the filter that is in the water tank
and rinse thoroughly. Replace by turning
and lightly pressing into place
cod. 165890902 Rev
. 02 del 28/11/01
