Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 374

Page: 374 / 703

Push the INFO button once more to return to

elapsed

time

priority mode.

Push and hold the INFO button for three seconds or more

and the radio will display song titles for each file.
Push and hold the INFO button again for three seconds

to return to

elapsed time

display.

Operation Instructions — Auxiliary Mode

The auxiliary (AUX) jack is an audio input jack which

allows the user to plug in a portable device such as an

MP3 player or iPod® and utilize the vehicle’s audio

system to amplify the source and play through the

vehicle speakers.
Pushing the AUX button will change the mode to auxil-

iary device if the AUX jack is connected.

NOTE:

The AUX device must be turned on and the

device’s volume set to the proper level. If the AUX audio

is not loud enough, turn the device’s volume up. If the

AUX audio sounds distorted, turn the device’s volume

down.

TIME Button (Auxiliary Mode)

Push this button to change the display to time of day. The

time of day will display for five seconds (when the

ignition is OFF).

Uconnect® (Satellite Radio) — If Equipped

Satellite radio uses direct satellite-to-receiver broadcast-

ing technology to provide clear digital sound, coast to

coast. The subscription service provider is Sirius Satellite

Radio. This service offers over 130 channels of music,

sports, news, entertainment, and programming for chil-

dren, directly from its satellites and broadcasting studios.

372 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands