Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 375

Page: 375 / 703

NOTE:

Sirius service is not available in Hawaii and has

limited coverage in Alaska.

System Activation

Sirius Satellite Radio service is pre-activated, and you

may begin listening immediately to the one year of audio

service that is included with the factory-installed satellite

radio system in your vehicle. Sirius will supply a wel-

come kit that contains general information, including

how to setup your on-line listening account. For further

information, call the toll-free number 888-539-7474, or

visit the Sirius web site at www.siriusxm.com, or at

www.siriusxm.ca for Canadian residents.

Electronic Serial Number/Sirius Identification
Number (ESN/SID)

Please have the following information available when

calling:

1. The Electronic Serial Number/Sirius Identification

Number (ESN/SID).

2. Your Vehicle Identification Number.
To access the ESN/SID, refer to the following steps:

ESN/SID Access

With the ignition switch in the ON/RUN or ACC posi-

tion and the radio on, push the SETUP button and scroll

using the TUNE/SCROLL control knob until Sirius ID is

selected. Push the TUNE/SCROLL control knob and the

Sirius ID number will display. The Sirius ID number

display will time out in two minutes. Push any button on

the radio to exit this screen.

Selecting Uconnect® (Satellite) Mode

Push the SAT button until

SAT

appears in the display. A

CD may remain in the radio while in the Satellite radio

mode.

UNDERSTANDING YOUR INSTRUMENT PANEL 373

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands