Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 450

Page: 450 / 703

Bi-Level Mode

Air comes from both the headliner outlets and the

floor outlets.

NOTE:

In many temperature positions, the Bi-Level

mode is designed to provide cooler air out of the head-

liner outlets and warmer air from the floor outlets.

Floor Mode

Air comes from the floor outlets.

Rear Automatic Temperature Control (ATC) — If
Equipped

The rear ATC system has floor air outlets at the rear of the

right side sliding door, and overhead outlets at each

outboard rear seating position. The system provides

heated air through the floor outlets or cool, dehumidified

air through the headliner outlets.

The rear system temperature control is on the front ATC

panel located on the instrument panel.
Pressing the Rear Temperature Lock button on the front

ATC panel, illuminates a lock symbol in the rear display.

The rear temperature and air source are controlled from

the front ATC panel.
Rear second row occupants can only adjust the rear ATC

control when the Rear Temperature Lock button is turned

off.
The rear ATC system is located in the headliner, near the

center of the vehicle.

448 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands