Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 376

Page: 376 / 703

Satellite Antenna

To ensure optimum reception, do not place items on the

roof around the rooftop antenna location. Metal objects

placed within the line of sight of the antenna will cause

decreased performance. Larger luggage items such as

bikes should be placed as far rearward as possible, within

the loading design of the rack. Do not place items directly

on or above the antenna.

Reception Quality

Satellite reception may be interrupted due to one of the

following reasons:

•

The vehicle is parked in an underground parking

structure or under a physical obstacle.

•

Dense tree coverage may interrupt reception in the

form of short audio mutes.

•

Driving under wide bridges or along tall buildings can

cause intermittent reception.

•

Placing objects over or too close to the antenna can

cause signal blockage.

Operating Instructions — Uconnect® (Satellite)
Mode

NOTE:

The ignition switch must be in the ON/RUN or

ACC position to operate the radio.

SEEK Buttons

Push and release the SEEK buttons to search for the next

listenable station in AM/FM mode. Push the right switch

to seek up and the left switch to seek down. The radio

will remain tuned to the new station until you make

another selection. Holding either button will bypass

stations without stopping, until you release it.

374 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands