Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 412

Page: 412 / 703

4. When the Mode Selection menu appears on screen,

use the cursor buttons on the remote control to navi-

gate to the available modes and press the OK button to

select the new mode.

5. To cancel out of the Mode Selection menu, press the

BACK button on the remote control.

Replacing The Headphone Batteries

Each set of headphones requires two AAA batteries for

operation. To replace the batteries:

•

Locate the battery compartment on the left ear cup of

the headphones, and then slide the battery cover

downward.

•

Replace the batteries, making sure to orient them

according to the polarity diagram shown.

•

Replace the battery compartment cover.

Unwired® Stereo Headphone Lifetime Limited
Warranty

Who Does This Warranty Cover?

This warranty covers

the initial user or purchaser (

you

your

) of this

particular Unwired Technology LLC (

Unwired

) wire-

less headphone (

Product

). The warranty is not transfer-

able.

How Long Does The Coverage Last?

This warranty lasts

as long as you own the Product.

What Does This Warranty Cover?

Except as specified

below, this warranty covers any Product that in normal

use is defective in workmanship or materials.

What Does This Warranty Not Cover?

This warranty

does not cover any damage or defect that results from

misuse, abuse or modification of the Product other than

by Unwired. Foam earpieces, which will wear over time

through normal use, are specifically not covered (replace-

ment foam is available for a nominal charge). UNWIRED

410 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands