Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 138

Page: 138 / 703

Power Mirrors — If Equipped

The power mirror controls are located on the driver-side

door trim panel.

The power mirror controls consist of mirror select but-

tons and a four-way mirror control switch. To adjust a

mirror, press either the L (left) or R (right) to select the

mirror that you want to adjust.

NOTE:

A light in the selected button will illuminate

indicating the mirror is activated and can be adjusted.
Using the mirror control switch, press on any of the four

arrows for the direction that you want the mirror to

move.
Left and Right side power mirror preselected positions

can be controlled by the optional Driver Memory Seat

Feature. Refer to “Driver Memory Seat” in “Understand-

ing The Features Of Your Vehicle” for further informa-

tion.

Power Mirror Controls

136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands