Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 411

Page: 411 / 703

Controls

The headphone power indicator and controls are located

on the right ear cup.

NOTE:

The rear video system must be turned on before

sound can be heard from the headphones. To conserve

battery life, the headphones will automatically turn off

approximately three minutes after the rear video system

is turned off.

Changing The Audio Mode For Headphones

1. Ensure the Remote Control channel/screen selector

switch is in the same position as the headphone

selector switch.

NOTE:

•

When both switches are on Channel 1, the Remote is

controlling Channel 1 and the headphones are tuned

to the audio of the VES™ Channel 1.

•

When both switches are on Channel 2, the Remote is

controlling Channel 2 and the headphones are tuned

to the audio of the VES™ Channel 2.

2. Press the SOURCE button on the remote control.
3. If the video screen is displaying a video source (such

as a DVD Video), pressing DISPLAY shows the status

on a popup banner at the bottom of the screen.

Pressing the SOURCE button will advance to the next

mode. When the mode is in an audio only source (such

as FM), the Mode Selection menu appears on screen.

UNDERSTANDING YOUR INSTRUMENT PANEL 409

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands