Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 383

Page: 383 / 703

device, or push the VR button and say

Shuffle ON

Shuffle Off.

If the

RND

icon is showing on the radio

display, then the shuffle mode is ON.

List Or Browse Mode

During Play mode, pushing any of the buttons described

below, will bring up List mode. List mode enables

scrolling through the list of menus and tracks on the

audio device.

TUNE

control knob: The

TUNE

control knob functions in

a similar manner as the scroll wheel on the audio device

or external USB device.

•

Turning it clockwise (forward) and counterclockwise

(backward) scrolls through the lists, displaying the

track detail on the radio display. Once the track to be

played is highlighted on the radio display, push the

TUNE

control knob to select and start playing the

track. Turning the

TUNE

control knob fast will scroll

through the list faster. During fast scroll, a slight delay

in updating the information on the radio display may

be noticeable.

During all List modes, the iPod® displays all lists in

“wrap-around” mode. So if the track is at the bottom of

the list, just turn the wheel backward (counterclockwise)

to get to the track faster.
In List mode, the radio

PRESET

buttons are used as

shortcuts to the following lists on the iPod® or external

USB device:

•

Preset 1 – Playlists

•

Preset 2 – Artists

•

Preset 3 – Albums

•

Preset 4 – Genres

•

Preset 5 – Audiobooks

•

Preset 6 – Podcasts

UNDERSTANDING YOUR INSTRUMENT PANEL 381

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands