Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 171

Page: 171 / 703

Voice Command

For best performance:

•

Adjust the rearview mirror to provide at least

inch

(1 cm) gap between the overhead console (if equipped)

and the mirror.

•

Always wait for the beep before speaking.

•

Speak normally without pausing, just as you would

speak to a person sitting a few feet/meters away from

you.

•

Make sure that no one other than you is speaking

during a Voice Command period.

Performance is maximized under:

•

Low-to-medium blower setting

•

Low-to-medium vehicle speed

•

Low road noise

•

Smooth road surface

•

Fully closed windows

•

Dry weather condition

NOTE:

•

Even though the system is designed for users speaking

in North American English, French, and Spanish ac-

cents, the system may not always work for some.

•

When navigating through an automated system such

as voice mail, or when sending a page, at the end of

speaking the digit string, make sure to say “Send.”

•

Storing names in the phonebook when the vehicle is

not in motion is recommended.

•

It is not recommended to store similar sounding names

in the Uconnect® Phonebook.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands