Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 448

Page: 448 / 703

3. When the system is set up for your comfort level, it is

not necessary to change the settings. You will experi-

ence the greatest efficiency by simply allowing the

system to function automatically.

NOTE:

•

It is not necessary to move the temperature settings for

cold or hot vehicles. The system automatically adjusts

the temperature, mode and fan speed to provide

comfort as quickly as possible.

•

The temperature can be displayed in English or Metric

units by selecting the “Display Units of Measure in”

customer-programmable feature. Refer to the “Elec-

tronic Vehicle Information Center (EVIC) — Customer-

Programmable Features” in this Section.

To provide you with maximum comfort in the automatic

mode, during cold start-ups, the blower fan will remain

on low until the engine warms up. The fan will engage

immediately if the Defrost mode is selected, or by chang-

ing the front blower knob setting.

Manual Operation Override

This system offers a full complement of manual override

features. The AUTO symbol in the front ATC display will

be turned off when the system is being used in the

manual mode.

Controlling The Rear Climate Controls From The
Front ATC Panel

The Three-Zone ATC system allows for adjustment of the

rear climate controls from the front ATC panel.

To change the rear system settings:

•

Press

REAR

button to change control to rear control

mode, Rear display (below) will appear. Control func-

tions now operate rear system.

446 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands