Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 345

Page: 345 / 703

Language

When in this display you may select one of three lan-

guages for all display screens, including the trip func-

tions and the navigation system (if equipped). Push and

release the UP or DOWN button while in this display and

scroll through the language choices. Push and release the

SELECT button to select English, Spanish (Español),

French (Français). Then, as you continue, the information

will display in the selected language.

Nav–Turn By Turn

When this feature is selected the navigation system

utilizes voice commands, guiding you through the drive

route mile by mile, turn-by-turn until the final destina-

tion is reached. To make your selection, push and release

the SELECT button until a check-mark appears next to

the feature showing the system has been activated, or the

check-mark is removed showing the system has been

deactivated.

Enable/Disable The Rear Park Assist System — If
Equipped

The Rear Park Assist system will scan for objects behind

the vehicle when the transmission is in the REVERSE

position and the vehicle speed is less than 11 mph

(18 km/h). The system can be enabled with Sound Only,

Sound and Display, or turned OFF through the EVIC. To

make your selection, push and release the SELECT

button until a check-mark appears next to the feature

showing the system has been activated or the check-mark

is removed showing the system has been deactivated.

Refer to “Rear Park Assist System” in “Understanding

The Features Of Your Vehicle” for system function and

operating information.

UNDERSTANDING YOUR INSTRUMENT PANEL 343

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands