Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 76

Page: 76 / 703

If the passenger seating position is equipped with an

ALR and is being used for normal usage:

Only pull the seat belt webbing out far enough to

comfortably wrap around the occupant’s mid-section so

as to not activate the ALR. If the ALR is activated, you

will hear a clicking sound as the seat belt retracts. Allow

the webbing to retract completely in this case and then

carefully pull out only the amount of webbing necessary

to comfortably wrap around the occupant’s mid-section.

Slide the latch plate into the buckle until you hear a

click.

In Automatic Locking Mode, the shoulder belt is auto-

matically pre-locked. The seat belt will still retract to

remove any slack in the shoulder belt. The Automatic

Locking Mode is available on all passenger seating

positions with a combination lap/shoulder belt. Use the

Automatic Locking Mode anytime a child restraint is

installed in a seating position that has a seat belt with this

feature. Children 12 years old and under should always

be properly restrained in a vehicle with a rear seat.

Second Row Bench

•

ALR= Switchable Automatic Locking Retractor

74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands