Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 435

Page: 435 / 703

Manual Heating And Air Conditioning System —
If Equipped

The controls for the manual system in this vehicle contain

a series of outer rotary dials and inner push knobs. These

comfort controls can be set to obtain desired interior

conditions.
With the Three-Zone Temperature Control system, each

front seat occupant can independently control the Heat-

ing, Ventilation and Air Conditioning operations coming

from the outlets on their side of the vehicle.
The primary control for the rear blower is on the front

climate control unit located on the instrument panel.

When the front control is in any position other than rear,

the front control operates all the rear functions.
The rear airflow modes will mirror the front unit opera-

tion. Rear Panel mode is automatically selected when the

front control is in the Panel mode. When the front unit is

in Bi-Level mode, airflow will be emitted from both the

upper and lower rear outlets. When the front control is in

Floor, Defrost, or Mix modes, airflow will be directed out

of the rear floor outlets.

Manual Temperature Control

UNDERSTANDING YOUR INSTRUMENT PANEL 433

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands