Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 428

Page: 428 / 703

To set the rating, activate the DVD Setup Menu and

follow these additional instructions:

•

Using the remote control’s Left and Right cursor

buttons, select the Rating tab.

•

Highlight

Change Rating

, and then press the remote

control’s ENTER/OK button.

•

Enter the current password. Select a digit, use the

remote control’s Up and Down cursor buttons to set

the value for the current digit, and then press the

remote control’s Right cursor button to select the next

digit. Repeat this digit selection sequence for all four

digits.

•

After the four-digit password is entered, press the

remote control’s ENTER/OK button. If the password

is correct, the Rating Level menu is displayed.

•

Using the remote control’s Up and Down cursor

buttons, select the new rating level, and then press the

remote control’s ENTER/OK button to accept the

change.

Product Agreement
Software

This product contains software licensed under GNU

General Public License (GPL) or GNU Lesser General

Public License (LGPL), etc. You have the right of acqui-

sition, modification, and distribution of the source code

of the GPL/LGPL software. You may download Source

Code from the following website at no charge.
http://www.embedded-carmultimedia.jp/linux/

oss/download/MP_632_34W821
The website provides the Source Code

As Is

and

without warranty of any kind. By downloading Source

426 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands