Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 444

Page: 444 / 703

5. Rear Temperature Control Display

This display shows the current Rear Temperature Control

settings.

6. Front Auto Indicator

This indicates when the system is in Front Auto mode.

7. Auto Indicator

This indicates when the system is in Auto mode.

8. Right Front Seat Occupant Temperature Display

This display shows the temperature setting for the right

front seat occupant.

9. Front Defrost Button

Press and release to change the current setting, the

indicator illuminates when ON. Performing this function

will cause the ATC to switch into manual mode. The

blower will engage immediately if the Defrost mode is

selected.

10. Passenger Temperature Control Up/Down Button

Provides the passenger with independent temperature

control. Push the top button for warmer temperatures or

the lower button for cooler temperature settings.

11. Rear Control Button

Provides toggle operation between front control screen

and rear control screen. Push the button to activate the

rear climate control screen and allow the front seat

occupants control over the rear climate settings.

442 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands