Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 66

Page: 66 / 703

5. Position the shoulder belt across the shoulder and

chest with minimal, if any slack so that it is comfort-

able and not resting on your neck. The retractor will

withdraw any slack in the shoulder belt.

6. To release the seat belt, push the red button on the

buckle. The seat belt will automatically retract to its

stowed position. If necessary, slide the latch plate

down the webbing to allow the seat belt to retract

fully.

Second/Third Row Center Belt Operating
Instructions

The second or third row center belt features a seat belt

with a mini-latch and buckle, which allows the belt to

detach from the lower anchor when the seat is folded.

The mini-buckle and seat belt can then be stored out of

the way in the seat for added convenience.

1. Remove the mini-latch and regular latch from its

stowed position on the seat.

Mini-Latch Stowage

64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands