Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 359

Page: 359 / 703

display the file name and folder name, and will assign

a number instead. With a maximum number of files,

exceeding 20 folders will result in this display. With

200 files, exceeding 50 folders will result in this dis-

play.)

Maximum number of characters in file/folder names:

•

Level 1: 12 (including a separator

and a three-

character extension)

•

Level 2: 31 (including a separator

and a three-

character extension)

Multi-session disc formats are supported by the radio.

Multi-session discs may contain combinations of normal

CD audio tracks and computer files (including MP3 files).

Discs created with an option such as

keep disc open after

writing

are most likely multi-session discs. The use of

multi-session for CD audio or MP3 playback may result

in longer disc loading times.

Supported MP3 File Formats

The radio will recognize only files with the *.MP3 exten-

sion as MP3 files. Non-MP3 files named with the *.MP3

extension may cause playback problems. The radio is

designed to recognize the file as an invalid MP3 and will

not play the file.
When using the MP3 encoder to compress audio data to

an MP3 file, the bit rate and sampling frequencies in the

following table are supported. In addition, variable bit

rates (VBR) are also supported. The majority of MP3 files

use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or

VBR bit rate.

UNDERSTANDING YOUR INSTRUMENT PANEL 357

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands