Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 228

Page: 228 / 703

Interior Lighting On

Rotate the left dimmer control completely upward to the

second detent (extreme top position) to turn on the

interior lights. The interior lights will remain on when the

dimmer control is in this position.
Interior lights are also turned on when a door or liftgate

is opened, the Remote Keyless Entry (RKE) transmitter is

activated, or when the dimmer control is moved to the

extreme top.
The interior lights will automatically turn off in approxi-

mately 10 minutes for the first activation and 90 seconds

every activation thereafter until the engine is started, if

one of the following occur:

•

A door, sliding door or the liftgate is left open.

•

Any overhead reading light is left on.

NOTE:

The ignition must be cycled to the OFF position

for this feature to operate.

Interior Lighting Off

Rotate the left dimmer control to the off position (extreme

bottom). The interior lights will remain off when the

doors or liftgate are open.

Parade Mode (Daytime Brightness Feature)

Rotate the left dimmer control to the first detent. This

feature brightens the odometer, radio and overhead

displays when the parking lights or headlights are on.

Halo Lights — If Equipped

Halo lights are strategically placed soft lighting that help

to illuminate specific areas to aid the occupants in

locating specific features while driving at night.
The Halo control switch is located to the right of the

dimmer switch.

226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands