Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 25

Page: 25 / 703

Remote Unlock Doors And Liftgate

Push and release the UNLOCK button on the RKE

transmitter once to unlock the driver’s side or twice to

unlock all doors and liftgate. This will also turn on the

Illuminated Entry system.

Remote Key Unlock On First Press

This feature lets you program the system to unlock either

the driver’s side, or all doors, on the first push of the

UNLOCK button on the RKE transmitter.

NOTE:

•

For vehicles equipped with an Electronic Vehicle In-

formation Center (EVIC), refer to “Electronic Vehicle

Information

Center

(EVIC)/Personal

Settings

(Customer-Programmable Features)” in “Understand-

ing Your Instrument Panel” for further information.

•

For vehicles not equipped with the EVIC, the Remote

Unlock feature can be enabled or disabled by perform-

ing the following steps:

1. Perform this operation while standing outside the

vehicle.

2. Push and hold the LOCK button on a programmed

RKE transmitter for at least 4 seconds, but no longer

than 10 seconds. Then, push and hold the UNLOCK

button while still holding the LOCK button.

3. Release both buttons at the same time.
4. Test the feature while outside of the vehicle by push-

ing the LOCK/UNLOCK buttons on the RKE trans-

mitter with the ignition switch in the OFF position and

the Key Fob removed.

5. Repeat these steps if you want to return this feature to

its previous setting.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands