Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 493

Page: 493 / 703

light remains on after several ignition cycles, and the

vehicle has been driven several miles (kilometers) at

speeds greater than 30 mph (48 km/h), see your autho-

rized dealer as soon as possible to have the problem

diagnosed and corrected.
The “ESC Activation/Malfunction Indicator Light” (lo-

cated in the instrument cluster) starts to flash as soon as

the tires lose traction and the ESC system becomes active.

The “ESC Activation/Malfunction Indicator Light” also

flashes when TCS is active. If the “ESC Activation/

Malfunction Indicator Light” begins to flash during ac-

celeration, ease up on the accelerator and apply as little

throttle as possible. Be sure to adapt your speed and

driving to the prevailing road conditions.

NOTE:

•

The “ESC Activation/Malfunction Indicator Light”

and the “ESC OFF Indicator Light” come on momen-

tarily each time the ignition switch is turned ON.

•

Each time the ignition is turned ON, the ESC system

will be ON even if it was turned off previously.

•

The ESC system will make buzzing or clicking sounds

when it is active. This is normal; the sounds will stop

when ESC becomes inactive following the maneuver

that caused the ESC activation.

The “ESC OFF Indicator Light” indicates the

Electronic Stability Control (ESC) is partially

off.

Trailer Sway Control (TSC)

TSC uses sensors in the vehicle to recognize an exces-

sively swaying trailer and will take the appropriate

actions to attempt to stop the sway. The system may

reduce engine power and apply the brake of the appro-

priate wheel(s) to counteract the sway of the trailer. TSC

will become active automatically once an excessively

STARTING AND OPERATING 491

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands