Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 442

Page: 442 / 703

Rear Mode Control

Headliner Mode

Air comes from the outlets in the headliner. Each

of these outlets can be individually adjusted to

direct the flow of air. Moving the air vanes of the outlets

to one side will shut off the airflow.

Bi-Level Mode

Air comes from both the headliner outlets and the

floor outlets.

NOTE:

In many temperature positions, the Bi-Level

mode is designed to provide cooler air out of the head-

liner outlets and warmer air from the floor outlets.

Floor Mode

Air comes from the floor outlets.

Automatic Temperature Control (ATC) — If
Equipped

•

Front Three-Zone ATC allows both driver and front

passenger seat occupant, and rear seat occupants to

select individual comfort settings.

•

When occupants in the vehicle select the AUTO mode

operation, a comfort temperature can be set by using

the temperature up and down buttons, and the auto

blower operation will be set automatically.

•

The system can be controlled manually, if desired.

•

SYNC feature links the controls for all three zones,

allowing one comfort setting (driver setting) for the

cabin, if desired.

The Three-Zone ATC system automatically maintains the

interior comfort level desired by the driver and all

passengers. The system automatically adjusts the air

temperature, the airflow volume, amount of outside air

440 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands