Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 369

Page: 369 / 703

If you insert a disc with the ignition ON/RUN and the

radio ON, the unit will switch from radio to CD mode

and begin to play when you insert the disc. The display

will show the track number, and index time in minutes

and seconds. Play will begin at the start of track 1.

CAUTION!

•

This CD player will accept 4–3/4 in (12 cm) discs
only. The use of other sized discs may damage the
CD player mechanism.

•

Do not use adhesive labels. These labels can peel
away and jam the player mechanism.

•

The Uconnect® 130 is a single CD player. Do not
attempt to insert a second CD if one is already
loaded.

(Continued)

CAUTION!

(Continued)

•

Dual-media disc types (one side is a DVD, the
other side is a CD) should not be used, and they can
cause damage to the player.

EJECT Button — Ejecting A CD

Push the EJECT button to eject the CD.

If you have ejected a disc and have not removed it within

10 seconds, it will be reloaded. If the CD is not removed,

the radio will reinsert the CD but will not play it.
A disc can be ejected with the radio and ignition OFF.

NOTE:

Ejecting with the ignition OFF is not allowed on

convertible or soft-top models (if equipped).

UNDERSTANDING YOUR INSTRUMENT PANEL 367

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands