Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 370

Page: 370 / 703

SEEK Button

Push the right SEEK button for the next selection on the

CD. Push the left SEEK button to return to the beginning

of the current selection, or return to the beginning of the

previous selection if the CD is within the first second of

the current selection. Pushing and holding the SEEK

button will allow faster scrolling through the tracks in

CD and MP3 modes.

TIME Button

Push this button to change the display from a large CD

playing time display to a small CD playing time display.

RW/FF

Push and hold FF (Fast Forward) and the CD player will

begin to fast forward until FF is released or RW or

another CD button is pushed. The RW (Reverse) button

works in a similar manner.

AM/FM Button

Push the button to select either AM or FM mode.

SET/RND Button (Random Play Button)

Push this button while the CD is playing to activate

Random Play. This feature plays the selections on the

compact disc in random order to provide an interesting

change of pace.
Push the right SEEK button to move to the next randomly

selected track.
Push the SET/RND button a second time to stop Random

Play.

Notes On Playing MP3 Files

The radio can play MP3 files; however, acceptable MP3

file recording media and formats are limited. When

writing MP3 files, pay attention to the following restric-

tions.

368 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands