Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 417

Page: 417 / 703

Disc Menu

When listening to a CD Audio or CD Data disc, pressing

the remote control’s POP UP/MENU button displays a

list of all commands which control playback of the disc.

Using the options you can activate or cancel Scan play

and Random play.

Display Settings

When watching a video source (DVD Video with the disc

in Play mode, Aux Video, etc.), pressing the remote

control’s SETUP button activates the Display Settings

menu. These settings control the appearance of the video

on the screen. The factory default settings are already set

for optimum viewing, so there is no need to change these

settings under normal circumstances.
To change the settings, press the remote control’s navi-

gation buttons (

) to select an item, then press the

remote control’s navigation buttons (

) to change the

value for the currently selected item. To reset all values

back to the original settings, select the Default Settings

menu option and press the remote control’s ENTER/OK

button.

Disc Menu For CDs

UNDERSTANDING YOUR INSTRUMENT PANEL 415

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands