Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 535

Page: 535 / 703

E-85 Usage In Non-Flex Fuel Vehicles

Non-Flex Fuel Vehicles (FFV) are compatible with gaso-

line containing 10% ethanol (E10). Gasoline with higher

ethanol content may void the New Vehicle Limited

Warranty.
If a Non-FFV vehicle is inadvertently fueled with E-85

fuel, the engine will have some or all of these symptoms:

•

Operate in a lean mode.

•

OBD II “Malfunction Indicator Light” on.

•

Poor engine performance.

•

Poor cold start and cold drivability.

•

Increased risk for fuel system component corrosion.

To fix a Non-FFV vehicle inadvertently fueled once with

E-85 perform the following:

•

Drain the fuel tank (see your authorized dealer).

•

Change the engine oil and oil filter.

•

Disconnect and reconnect the battery to reset the

engine controller memory.

More extensive repairs will be required for prolonged

exposure to E-85 fuel.

MMT In Gasoline

Methylcyclopentadienyl Manganese Tricarbonyl (MMT)

is a manganese-containing metallic additive that is

blended into some gasoline to increase octane. Gasoline

blended with MMT provides no performance advantage

beyond gasoline of the same octane number without

MMT. Gasoline blended with MMT reduces spark plug

life and reduces emissions system performance in some

vehicles. The manufacturer recommends that gasoline

STARTING AND OPERATING 533

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands