Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 358

Page: 358 / 703

AM/FM Button

Push the button to select either AM or FM mode.

SET/RND Button (Random Play Button)

Push this button while the CD is playing to activate

Random Play. This feature plays the selections on the

compact disc in random order to provide an interesting

change of pace.
Push the right SEEK button to move to the next randomly

selected track.
Push the RND button a second time to stop Random Play.

Notes On Playing MP3 Files

The radio can play MP3 files; however, acceptable MP3

file recording media and formats are limited. When

writing MP3 files, pay attention to the following restric-

tions.

Supported Media (Disc Types)

The MP3 file recording media supported by the radio are

CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.

Supported Medium Formats (File Systems)

The medium formats supported by the radio are ISO 9660

Level 1 and Level 2 and includes the Joliet extension.

When reading discs recorded using formats other than

ISO 9660 Level 1 and Level 2, the radio may fail to read

files properly and may be unable to play the file nor-

mally. UDF and Apple HFS formats are not supported.
The radio uses the following limits for file systems:

•

Maximum number of folder levels: 8

•

Maximum number of files: 255

•

Maximum number of folders. (The radio display of file

names and folder names is limited. For large numbers

of files and/or folders, the radio may be unable to

356 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands