Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 474

Page: 474 / 703

Transmission Limp Home Mode

Transmission function is monitored electronically for

abnormal conditions. If a condition is detected that could

result in transmission damage, Transmission Limp Home

Mode is activated. In this mode, the transmission remains

in third gear regardless of which forward gear is selected.

PARK, REVERSE, and NEUTRAL will continue to oper-

ate. The Malfunction Indicator Light (MIL) may be illu-

minated. Limp Home Mode allows the vehicle to be

driven to an authorized dealer for service without dam-

aging the transmission.
In the event of a momentary problem, the transmission

can be reset to regain all forward gears by performing the

following steps:
1. Stop the vehicle.
2. Shift the transmission into PARK.
3. Turn the ignition switch to the OFF position.

4. Wait approximately 10 seconds.
5. Restart the engine.
6. Shift into the desired gear range. If the problem is no

longer detected, the transmission will return to normal

operation.

NOTE:

Even if the transmission can be reset, we recom-

mend that you visit your authorized dealer at your

earliest possible convenience. Your authorized dealer has

diagnostic equipment to determine if the problem could

recur.
If the transmission cannot be reset, authorized dealer

service is required.

472 STARTING AND OPERATING

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands