Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 453

Page: 453 / 703

•

Bi-Level Mode

Air comes from both the headliner outlets and the

floor outlets.

NOTE:

In many temperature positions, the Bi-Level

mode is designed to provide cooler air out of the head-

liner outlets and warmer air from the floor outlets.

•

Floor Mode

Air comes from the floor outlets.

Operating Tips

NOTE:

Refer to the chart at the end of this section for

suggested control settings for various weather condi-

tions.

Summer Operation

The engine cooling system must be protected with a

high-quality antifreeze coolant to provide proper corro-

sion protection and to protect against engine overheating.

OAT coolant (conforming to MS-12106) is recommended.

Refer to “Maintenance Procedures” in “Maintaining Your

Vehicle” for proper coolant selection.

Winter Operation

To ensure the best possible heater and defroster perfor-

mance, make sure the engine cooling system is function-

ing properly and the proper amount, type, and concen-

tration of coolant is used. Refer to “Maintenance

Procedures” in “Maintaining Your Vehicle” for proper

coolant selection. Use of the air Recirculation mode

during Winter months is not recommended, because it

may cause window fogging.

UNDERSTANDING YOUR INSTRUMENT PANEL 451

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands