Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 473

Page: 473 / 703

DRIVE (D)

This range should be used for most city and highway

driving. It provides the smoothest upshifts and down-

shifts, and the best fuel economy. The transmission

automatically upshifts through all forward gears. The

DRIVE position provides optimum driving characteris-

tics under all normal operating conditions.
When frequent transmission shifting occurs (such as

when operating the vehicle under heavy loading condi-

tions, in hilly terrain, traveling into strong head winds, or

while towing heavy trailers), use the Electronic Range

Select (ERS) shift control (refer to

Electronic Range Select

(ERS) Operation

in this section for further information)

to select a lower gear range. Under these conditions,

using a lower gear range will improve performance and

extend transmission life by reducing excessive shifting

and heat buildup.

During cold temperatures, transmission operation may

be modified depending on engine and transmission

temperature as well as vehicle speed. This feature im-

proves warm up time of the engine and transmission to

achieve maximum efficiency. Engagement of the torque

converter clutch is inhibited until the transmission fluid

is warm (refer to the “Note” under “Torque Converter

Clutch” in this section). During extremely cold tempera-

tures (-16°F [-27°C] or below), operation may briefly be

limited to third gear only. Normal operation will resume

once the transmission temperature has risen to a suitable

level.

STARTING AND OPERATING 471

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands