Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 447

Page: 447 / 703

Only use the Recirculation mode to temporarily block out

any outside odors, smoke, or dust, and to cool the interior

rapidly upon initial start-up in very hot or humid

weather.

NOTE:

•

If the Recirculation button is pressed when the system

is in Defrost mode the Recirculation LED indicator will

flash three times to indicate Recirculation mode is not

allowed.

•

Continuous use of the Recirculation mode may make

the inside air stuffy and window fogging may occur.

Extended use of this mode is not recommended.

•

In cold or damp weather, the use of the Recirculation

mode will cause windows to fog on the inside because

of moisture buildup inside the vehicle. For maximum

defogging, select the outside air position.

•

To prevent fogging, when the Recirculation button is

pushed and the mode control is set to Panel, the A/C

will engage automatically.

•

The A/C can be deselected manually without disturb-

ing the mode control selection.

Automatic Temperature Control (ATC)
Automatic Operation

1. Press the AUTO button on the front ATC Panel and the

words Front Auto will illuminate in the front ATC

display, along with two temperatures for the driver

and front passenger. The system will then automati-

cally regulate the amount of airflow.

2. Next, adjust the temperature you would like the

system to maintain, by adjusting the driver, passenger,

and rear temperatures. Once the desired temperature

is displayed, the system will achieve and automati-

cally maintain that comfort level.

UNDERSTANDING YOUR INSTRUMENT PANEL 445

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands